Presenting you with several errors or not running at all. Only solution was to install on a XP system or like me. Well that all changed with BST 2.12 which works on 32 or 64bit systems. == STEP 5: CHANGING THE OBD.INI Navigate to C: EDIABAS BIN and find file obd.ini and open it with an editor such as notepad. Port=Com1 Hardware=USB So we need to change the Port to reflect our INPA cable which in our case is COM port 5. Port=Com5 Hardware=USB When done click File ->Save and exit out. Very important to remember which USB port you connected your cable to as plugging it into a different USB port will allocate the INPA cable to a different COM port and neither tool will see the cable until the original USB port is used again or changed in device manager and obd.ini as mentioned above. Now to test if your cable installed correctly. Plug it into the vehicle's OBD port and open INPA. If not follow the above steps again and correct your error. == STEP 6: SPDATEN FILES Download and install SPDaten files of your choice (always recommend the latest) in this case it is 50.2 until I finish zipping and upload SPDatens 51.0 and upload it to share.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |